Self Help Guide
Upgrading the Firmware on your Belkin VoIP Router
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
(You will be presented with the following screen)
F1PI242ENau
TSG-ANZ-VHD-12
Page 1 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
Self Help Guide
You will now need to restore the unit to Factory Defaults
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
Step 4 Click Tools then Configuration Tools
(You will be presented with the following screen)
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next
Step 6 Click APPLY
(You will be presented with the following screen)
TSG-ANZ-VHD-12
Page 3 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
Self Help Guide
You will now need to re-enter your Username and Password Settings
Please do not use a saved configuration as it will not function correctly with
the updated firmware.
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Under ADSL Parameter Setting Enter your Username and
Password into the fields
(You will be presented with the following screen)
Step 4 Click Save Settings
TSG-ANZ-VHD-12
Page 4 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
|